Rapid–HYDRO 2-4-0.2
Shake thoroughly before use to ensure a homogeneous product.
Note: Chemical fertilizers are poison. The residual poison can kill some of the live microbes in Rapid Growth Nutrients fertilizers; therefore, it is important to reapply Rapid–HYDRO on a consistent basis until the soil is completely reconditioned. For use on chemically fertilized plants and soil, apply Rapid–HYDRO every 9 to 15 days. Results are visible in two weeks; within 2 to 4 months plants and soil health will be fully restored.
Dilution rates:
Dilution rates vary based upon irrigation delivery system. Standard dilution rate is one gallon of Rapid–HYDRO to 32 to 40 gallons of water. Our label says 1 to 35. It is recommended to start with a 1:32 ratio until soil is fully propagated, after which a maintenance ratio of 1:40 is sufficient. Every 12 to 20 days.
1. Drip and foliar spray systems require a dilution rate of 1 part Rapid–HYDRO to 15 parts water.
2. Micro-emitters and sprinkler systems require no dilution; inject directly into irrigation pipes, then adjust to your needs.
Coverage (see application tables)
- If used as a foliar, 30 to 60 gallons per acre is typical (diluted)
- If applied to soil, 32 to 175 gallons per acre is typical (diluted)
- Apply several times throughout the growing cycle for a total of 32 to 50 gallons per acre
Safety and disposal
- Dispose of all unused solution; do not store in diluted form
- This is a non-toxic product; however, it is recommended to wash hands with soap and water after contact and to flush equipment with water after use
